440.951.6022 phone    
3900 Ben Hur Avenue, Suite 10
Willoughby, Ohio 44094
440.951.6012 fax
Home
  Benefits of BASWAphon
Finishes
Technical Data
Installation
LEED
  Photo Gallery
Projects
Locate a Rep
Locate an Installer
Brochure
  Request a Sample
Contact Us

   

 

Select a Finish System

1. BASWAphon Frosted Finish

Light Sand Finish, Seamless Sound Absorptive Acoustical Finish System
2. BASWAphon Classic Finish

Premium Smooth Finish, Seamless Sound Absorptive Acoustical Finish System
3. BASWAphon Clean Finish

Mold and Mildew Resistant Finish, Seamless Sound Absorptive Finish System

youtube
Continue to Learn More

BASWAphon Frosted Finish
Light Sand Finish

General

This “Frosted“ System has the lowest installed cost with the following advantages:

  1. The NRC Rating for the Frosted 30mm is 0.75, the 40mm is 0.80 and the 68mm is 0.85.

  2. Seamless up to 5,000 sf.

  3. Consists of a factory pre-coated “supporting” panel (a bonded mineral wool backing coated with glass “micro-spheres”), a trowel applied Base 407 coat (coarse marble aggregate in a proprietary emulsion) and a spray applied “Frost” Coat (fine marble aggregate in a proprietary emulsion).

  4. Can be domed, vaulted, warped or curved in one or two directions.

  5. Can be integrally pigmented to match any color, including black or other deep, dark colors.

  6. The Frosted Finish is not water soluble and is mold and mildew resistant.

  7. Very durable and can be washed, even “scrubbed” with a brush and rinsed with clean water to remove most stains.


System set-up

 

BASWAphon – Classics

  1. Spray applied BASWAphon "Frost" Coat

  2. Trowel applied BASWAphon 407 Base Coat

  3. Pre-Coated BASWAphon Supporting Panel

  4. BASWAphon Adhesive

  5. Stable Substrate
Back to Top

More Information Available
[ Photos | Installation | Locate an Installer | Technical ]



BASWAphon Classic Finish
Premium Smooth Finish

General


This “Classic” System continues to set the aesthetic and acoustical standard for all seamless acoustical products with the following properties:

  1. The NRC Rating for the Classic 30mm is 0.75, the 40mm is 0.80 and the 68mm is 0.85

  2. Seamless up to 5,000 sf.

  3. Consists of a factory pre-coated “supporting” panel (a bonded mineral wool backing coated with glass “micro-spheres”), a trowel applied Base 407 coat (coarse marble aggregate in a proprietary emulsion) and a trowel applied Top Coat (fine marble aggregate in a proprietary emulsion).

  4. Can be domed, vaulted, warped or curved in one or two directions.
  5. Can be integrally pigmented to match any color or multiple colors.

 


System set-up

 

BASWAphon – Classics

  1. Trowel applied BASWAphon Top Coat

  2. Trowel applied BASWAphon 407 Base Coat

  3. Pre-Coated BASWAphon Supporting Panel

  4. BASWAphon Adhesive

  5. Stable Substrate
Back to Top

More Information Available
[ Photos | Installation | Locate an Installer | Technical ]


BASWAphon Clean Finish
Mold and Mildew Resistant Finish

General

 

The “Clean“ System is a specialty product that is highly resistant to moisture, mold and mildew, with a cost comparable to the “Classic“ System. It is applied on ceiling surfaces of indoor swimming pools, protected exterior spaces or other high moisture applications. This System has the following attributes:

  1. The NRC rating for the Clean 30mm is 0.75, the 40mm is 0.80 and the 68mm is 0.85

  2. Seamless up to 5,000 sf.

  3. Consists of a factory pre-coated supporting panel (a bonded mineral wool backing coated with glass micro-spheres ), a trowel applied Base 407 coat (coarse marble aggregate in a proprietary emulsion) and a trowel applied Finish Coat (coarse marble aggregate in a proprietary emulsion).

  4. Can be domed, vaulted, warped or curved in one or two directions.

  5. Can be integrally pigmented to match any color or colors.

  6. Very durable and can be washed, even scrubbed with a brush and rinsed with clean water to remove most stains.

  7. Not water soluble and mold and mildew resistant


System set-up

 

BASWAphon – Classics

  1. Trowel applied BASWAphon 407 Finish Coat

  2. Trowel applied BASWAphon 407 Base Coat

  3. Pre-Coated BASWAphon Supporting Panel

  4. BASWAphon Adhesive

  5. Stable Substrate
 
  Have a Request? Want More Information?

Name
E-mail Address: *
Phone
Project Request
Our privacy policy keeps your email address 100% safe and secure.
* Required  

More Information Available
[ Photos | Installation | Locate an Installer | Technical ]

 

  
 

Baswaphon acoustical

Baswaphon acoustical

Sound Solutions

Sound solutions

baswa

Baswaphon acoustical

3900 Ben Hur Avenue, Suite 10, Willoughby, Ohio 44094
440.951.6022 phone  |  440.951.6012 fax


BASWAphon is a product of BASWA AG of Switzerland. © 2009 BASWA acoustic North America, LLC