BASWA acoustic North America Has the Right Acoustic Finish System for Your Project

BASWA - Acoustic systems for controlling sound reverberation time
Sound in a room is spread in all directions and reflected completely or partially at the surfaces. Does a room resound too much; the reverberation time has to be cut back by absorptive measures. These absorptive measures should be adapted to the room requirements.

The heart of BASWAphon’s appeal is a combination of exceptional absorption with a strikingly beautiful appearance. The Classic finish is smooth, seamless, with the look of hand-troweled plaster. The final rich looking result can be integrally colored to conform to the design concept.

The system is suitable for:

• level surfaces such as ceilings, floors 
• arched and vaulted surfaces 
• double-curved surfaces

This tried and tested system can be put to use universally and combines all the advantages of the BASWAphon acoustic system. The system provides the highest degree of freedom, enabling the creation of the very finest surface structure.

Special features

• finest surface structure
• intense coloration
• curved surfaces
• BASWAphon Top covering layer
• BASWAphon 407 foundation layer
• BASWAphon supporting panel
• Seamless

BASWAphon Resilient Finish
Smooth, Seamless Sound Absorptive Acoustical Finish System

The Resilient System is a specialty product that is highly resistant to moisture, mold and mildew.It is applied on ceiling surfaces of indoor swimming pools, protected exterior spaces or other high moisture applications. This System has the following attributes:

• The Resilient System has a slightly granular smooth hand troweled finish . Inherent with any hand troweled product, slight variations or imperfections in the finished surface may be visible with critical lighting.
• Up to 5,000 s.f. can be installed in one continuous surface.
• The Resilient System consists of a factory pre-coated supporting panel (a bonded mineral wool backing coated with glass micro-spheres ), a trowel applied Base 407 coat (coarse marble aggregate in a proprietary emulsion) and a trowel applied Finish Coat (coarse marble aggregate in a proprietary emulsion).
• The ResilientSystem can be curved in one or two directions with relative ease at a minor cost increase.
• The Resilient System can be integrally pigmented to match any pastel to medium deep color.
• Touch-up and cleaning of the Resilient System must be performed under the direction of a qualified BASWAphon Technician.
• The Resilient System is very durable and can be washed, even scrubbed with a brush and rinsed with clean water to remove most stains.

Special features

• finest surface structure
• intense coloration
• curved surfaces

• Trowel applied BASWAphon 407 Finish Coat
• Trowel applied BASWAphon 407 Base Coat
• Pre-Coated BASWAphon supporting panel
• BASWAphon Adhesive

Stable Substrate
BASWAphon products can be used for many applications including

• Acoustical absorption for classroom
• Acoustical systems for ceilings
• Acoustical absorption in broadcast studios
• Sound absorption systems for theaters
• Acoustical absorption for libraries
• Noise reduction in conference rooms
• Noise control for home theaters
And many other acoustical solutions

BASWAphon Frosted Finish
Frosted, Seamless Sound Absorptive Acoustical Finish System

This Frosted System has the lowest installed cost with the following advantages:

• The Frosted System has BASWAphon’s “light sand” finish.
• Up to 5,000 s.f. can be installed in one continuous surface.
• The Frosted System consists of a factory pre-coated “supporting” panel (a bonded mineral wool backing coated with glass “micro-spheres”), a trowel applied Base 407 coat (coarse marble aggregate in a proprietary emulsion) and a spray applied Frosted Coat (fine marble aggregate in a proprietary emulsion).
• The Frosted System can be curved in one or two directions very easily for a nominal cost increase.
• The Frosted System can be integrally pigmented to match any color, including black or other deep, dark colors.
• Touch-up of the Frosted System should be performed by a qualified BASWAphon Technician, however on-site personnel can be easily trained to perform most required repairs.
• The Frosted System is not water soluble. The Frosted finish surface is very durable and can be washed, even “scrubbed” with a brush and rinsed with clean water to remove most stains.

Special features

• finest surface structure
• intense coloration
• curved surfaces

• Spray applied BASWAphon "Frost" Coat
• Trowel applied BASWAphon 407 Base Coat
• Pre-Coated BASWAphon Supporting Panel
• BASWAphon Adhesive
• stable Substrate